Hello! I am new here and hoping for some useful advice. We have a S220, 14KW, 3 element heater. Recently, only while showering, (not when running water for a bath or anything else) the heater will stop heating. I watched it this morning while our son was showering and the red light was blinking while it was in use and then it just stopped and of course the water went cold. You have to shut the shower water off for a few seconds and then back on to get hot water again.... and it will likely cycle off again after maybe a 1 minute or 3. Can anyone give me some advice on this? WE have had it for years and it has been a GREAT heater, this is the only issue we have ever had with it.
This is a small house, 1200 sq ft. The water pressure is quite steady as there is a pressure regulator at the water pump.
Thank you!
This is a small house, 1200 sq ft. The water pressure is quite steady as there is a pressure regulator at the water pump.
Thank you!
Last edited: