Geniescience
Homeowner
I'm figuring out a faucet handles control board. The handles are a series of turn knobs in a line up. The knobs have oblong covers so you can more easily turn them with 1 or 2 fingers, and you can see when one is already turned, and by how much.
It's for several reasons.
Hot mains, aerated
Cold mains, aerated
Filtered non-aerated and low flow
Instant Hot tank (boiling hot and from the filtered source)
That makes 4.
Add one more for a separate spout, e.g. a hose + handspray for rinsing the sink out.
Or this button is for a diverter.
Now we have 5.
Add one more turn button, for soap.
Add one more turn button, for a remote drain pop up.
Now we have 7.
Anyone think of more ? I'd like input with ideas.
It's for several reasons.
Hot mains, aerated
Cold mains, aerated
Filtered non-aerated and low flow
Instant Hot tank (boiling hot and from the filtered source)
That makes 4.
Add one more for a separate spout, e.g. a hose + handspray for rinsing the sink out.
Or this button is for a diverter.
Now we have 5.
Add one more turn button, for soap.
Add one more turn button, for a remote drain pop up.
Now we have 7.
Anyone think of more ? I'd like input with ideas.