It's heavy. I would never pull 300+' by hand at once, that's insanity. U better find a very tough dude for that kind of pulling, and hope he has a twin.
If this were me and I didn't have any of the equipment i have, and was planning on doing this by hand... If u couldnt build a 20' tripod, I would pull it up by hand 1 joint at the time. Use a piece of steel plate with a notch that the pipe will fit in but the collars won't.. A makeshift pipe "dog".. So u can dog it off at the well head every time u pull up a joint, then use 2 wrenches (one to hold the collar and one to spin the pipe out of the collar (while it's dogged off at the well head of course). Probably need 3 guys, 2 to pull it up and dog it off, and another on a ladder or in back of truck keeping the pipe from falling over until u twist it out (kid could do this, as that kid has been me before). This would be your safest bet, gives u a break and it won't be as hectic. when u pull up that first joint, u'll be very happy u didn't try to pull another 330' without taking a break. I can think of very few people that have the power and stamina to nonstop pull 350' of filled sch. 80 with wire and a pump on the end. I am not one of them.. and I'm young and in great shape. just my .02 ..U can try it however u please.