Toto Ultramax Leaky fill Valve

Users who are viewing this thread

ufokillerz

New Member
Messages
7
Reaction score
0
Points
0
Location
New York
I have the fill valves made by some chinese oem, a TSU18A i believe, not korky.

recently i notice that water has been going into the flush valve via the tube that goes from fill valve to flush valve. Is there anything i can do to repair the leak? I do not believe that i have high water pressure. I do however have water that leaves red stains, and there is some collection of them inside my tank, almost looks like they are piling together in the tank.

Asides from replacing the fill valve, do i have any other solutions? The toilet has been installed for maybe half a year, but it was purchased over a year ago.
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks