jsarin1
New Member
I am installing plumbing in my bath to include two showerheads instead of 1. I have attached 2 diagrams of how the lines will be setup. Does this look ok to you guys? Will there be any problems I should consider with this setup? The dotted line represents copper line I am running above the drywall ceiling of the shower.
I have looked into the jetted diverter that has an additional outlet on it, but I believe that is for shower only setups.
I will be using the Addison Tempassure 17T Tub/Shower Trim (T17T492-RB), the Addison 3-setting diverter (T11992-RB), and the slidebar Handheld as the secondary showerhead (54713-RB).
Thanks in advance for the advice...this forum has helped so much in my renovations!!
http://www.deltafaucet.com/bath/customshowers.html
I have looked into the jetted diverter that has an additional outlet on it, but I believe that is for shower only setups.
I will be using the Addison Tempassure 17T Tub/Shower Trim (T17T492-RB), the Addison 3-setting diverter (T11992-RB), and the slidebar Handheld as the secondary showerhead (54713-RB).
Thanks in advance for the advice...this forum has helped so much in my renovations!!
http://www.deltafaucet.com/bath/customshowers.html
For help creating your ideal shower experience, download or print Delta's Custom Shower Design Guide.
links added by Terry
Attachments
Last edited by a moderator: