(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Wall Vented Range Hood

  1. #1
    DIY Member K2's Avatar
    Join Date
    Jul 2008
    Location
    Delridge Valley
    Posts
    77

    Default Wall Vented Range Hood

    Hey guys, I'm having a hell of a time trying to find a decent range hood that i can vent through the wall, that does NOT have to be mounted to a cabinet...

    most of the ikea/HD ones don't specifcally say you can vent through the wall, does anyone have experience with this?

    Style is not a big concern, but I don't want to pay $1000 for a hood...

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,405

    Default

    Many of them are not built strong enough to just hang on the wall without support from above. Some are not 'finished' on the top horizontal surface. Most of those that are recirculating, have a removable plug so you can actually vent them outside. You'd need to find one that would let you vent directly out the back. What you may find as difficult is fabricating an air-tight fitting that would transition to something you could fit a vent cap on outside on the wall that also has a damper in it to prevent the hood from becoming a direct open hole to the outside. While I heartily concur venting to the outside is preferable (and mine is), keeping that sealed off and transitioning to a termination out there can be problematic, especially if the wall depth is 2x4 construction. There are some designed to hang and the decorative duct comes out the top, then turns to go out through the wall, but the pipe diameter is pretty large. Mine was particularly troublesome, as iit required an 8" round outlet, but then it has a pretty large motor that could lift your toupe on high if you aren't careful!

    Sorry I can't recommend something...I'm sure there's some out there.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,653

    Default

    The rear outlet is not that rare, but trying to hang it would be the big problem without a cabinet above it. You would have to create some decorative brackets to mount it to. Most do NOT have a "finished" top since they are intended to mount to something.

Similar Threads

  1. Convert dryer vent to range hood vent?
    By petergunn in forum HVAC Heating & Cooling
    Replies: 10
    Last Post: 11-10-2009, 03:42 AM
  2. Is a wall-mount toilet vented the same as a floor-mount toilet?
    By dimprov in forum Toilet Forum discussions
    Replies: 3
    Last Post: 02-10-2009, 05:31 AM
  3. Island range hood still leaking
    By DougieM in forum HVAC Heating & Cooling
    Replies: 2
    Last Post: 11-21-2008, 06:57 PM
  4. range hood
    By geandham in forum Electrical Forum discussion & Blog
    Replies: 3
    Last Post: 01-27-2008, 08:59 AM
  5. Need advice - New range not fitting against wall due to gas pipe
    By Maxine in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 12-14-2006, 07:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •