I am remodeling my bathroom and I am adding a fan/light combo above the tub. The manual says this has to be gfci protected.
There is also a vanity light and gfci receptacle that is running on the old 15a circuit with the switch that controlled BOTH of these in the hallway. I would like to keep the vanity light only on this circuit. Here's my plan and let me know if I'm wrong or could do something differently
1. Run new 20amp circuit for the gfci receptacle
2. Keep vanity light on the old 15amp circuit.
3 Run new 15amp circuit to gfci dead front then to switch for fan/light then to the fan/light
Thanks
There is also a vanity light and gfci receptacle that is running on the old 15a circuit with the switch that controlled BOTH of these in the hallway. I would like to keep the vanity light only on this circuit. Here's my plan and let me know if I'm wrong or could do something differently
1. Run new 20amp circuit for the gfci receptacle
2. Keep vanity light on the old 15amp circuit.
3 Run new 15amp circuit to gfci dead front then to switch for fan/light then to the fan/light
Thanks