The perferations should be on the bottom sides of the pipe not the bottom or top, normally the labeling on the pipe will be face up.
http://www.easydigging.com/Drainage/...nch_drain.html
|
|
|
My contractor is putting in my french drain but the pipe does not have holes on the bottom, only on the top and the sides.. Is it correct? Will that be effective in carrying water away or should I have him redo the pipe? thanks
The perferations should be on the bottom sides of the pipe not the bottom or top, normally the labeling on the pipe will be face up.
http://www.easydigging.com/Drainage/...nch_drain.html
Last edited by Terry; 09-02-2010 at 02:38 PM.
Bookmarks