Seattle38
New Member
I'm in Bothell, WA, currently replacing the main between the meter and house. I plan to use type L soft copper, probably sleeved with some closed cell foam.
The run is about 70ish feet, with a couple of bends; up a rise and around the foundation. Is an expansion loop necessary? or will the bends take up any expansion and contraction?
Any recommendations on a place to get a 100 foot roll of type L soft at a reasonable cost?
Thanks!
The run is about 70ish feet, with a couple of bends; up a rise and around the foundation. Is an expansion loop necessary? or will the bends take up any expansion and contraction?
Any recommendations on a place to get a 100 foot roll of type L soft at a reasonable cost?
Thanks!