(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 11 of 11

Thread: Toto toilet design question, and wax ring size

Threaded View

  1. #1

    Default Toto toilet design question, and wax ring size

    I'm getting ready to install a Toto Eco Clayton. I looked carefully at the new toilet today and noticed two things I wouldn't have expected:

    1) Although the bowl is smoothly glazed, the trapway inside feels rough, sort of like 220 grit sandpaper.
    2) There is a lip inside the trapway exit that would seem to be able to trap things as they exit the toilet (see attached photo)

    Are these two things normal?

    Also, how do I know what size (thickness) wax ring to use? The flange is sitting on top of the bathroom floor, and it's 1 inch deep inside the flange. It seemed like I scraped a lot of wax out when I removed the old toilet. Thanks.

    Name:  2010-07-14 Pictures 012 (Large).jpg
Views: 3949
Size:  25.3 KB
    Last edited by npurdy506; 07-14-2010 at 09:39 AM.

Similar Threads

  1. Toto toilet recall 2007 or Burning Ring of Fire
    By Intrepid in forum Toilet Forum discussions
    Replies: 3
    Last Post: 11-05-2009, 10:53 AM
  2. copper size/design
    By buzzard in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 08-10-2008, 04:55 PM
  3. question on size of toilet
    By harveymasons in forum Toilet Forum discussions
    Replies: 2
    Last Post: 05-28-2008, 05:50 PM
  4. Supply line design and size for 2nd bathroom
    By Sterling in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 01-03-2008, 02:45 PM
  5. Toilet Wax Ring Installation Question
    By jk60 in forum Toilet Forum discussions
    Replies: 3
    Last Post: 11-29-2005, 06:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •