Internal Pipe Cutter

Esquire · Jun 8, 2010

Just wondering what all you guys are using for internal pipe cutters? ie cutting the toilet pipe below floor level to install a flange. Usually find this situation when finishing a basement that was roughed-in during the building stage.

MACPLUMB · Jun 8, 2010

I ALWAYS USED ONE OF THESE ! !

http://www.ridgid.com
INTERNAL PIPE CUTTER

Sponsor · 2022-01-29T12:20:58-0800

hj · Jun 9, 2010

I slide the flange over the pipe, and then saw it off flush with the top of the flange. But then, I always use a 4" riser pipe. When it is a 3" riser that someone else installed, then I use the Ridgid #109 internal cutter.

Doherty Plumbing · Jun 9, 2010

I use a Reed internal pipe cutter. I also carry both the carbon cut off disk and the steel saw blade to go with it.

Internal Pipe Cutter

Users who are viewing this thread

Esquire

Plumber

MACPLUMB

In the Trades

Sponsor

Paid Advertisement

hj

Master Plumber

Doherty Plumbing

Journeyman & Gas Fitter

Similar threads