Water Mate WM-6 question.

Users who are viewing this thread

Ryan Seamone

New Member
Messages
2
Reaction score
0
Points
0
Location
Canada
Well I am still trying to figure out whats going on with my pump and stuff ( have an earlier post ). The pump is still running all the time.
Anyways , my tank is a WaterMate WM-6 captive air tank. I wasns sure about the opperating pressure and the tank itself said 125psi ( which i thot was high ) so I googled it and found that they are set at 40 and adjusted to meet specific needs when they are installed. I grabbed a mirror and say mine was at 20. So i upped the pressure to 40. Still no difference. I can hear water sloshing a few inches from the top when I move the tank, but I dont get any water out of the shraeder valve.
And now the air pressure is back bown to 20psi, any suggestions ?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks