My mistake about all of the values. I could not find the dn and not being familiar with what I as looking at and not taking the time to look more closely I asked for help. The instructions say that you program for dn then a few other steps. After the hardness value is entered they say to set the next value to 14 for municipal water and 7 for any other source of water. I am not sure if unlocking the computer allowed me to see this number as I dont recall. I read about unlocking the computer from the WS1 manual I downloaded from the clack site
At the discretion of the manufacturer, the field technician can access all settings. To “lock out” access to diagnostic and valve
history displays and modifications to settings except hardness, day override, time of regeneration and time of day by anyone but
the manufacturer, press ▼, NEXT, ▲, and SET CLOCK in sequence after settings are made. To “unlock”, so other displays can be
viewed and changes can be made, press ▼, NEXT, ▲, and SET CLOCK in sequence.
Aquatell should have told you what P number to use and the K and salt dose lbs.
Please remember that they said to program it for 60k an 30 lbs of salt and P7?. I am trying to set this so it will work best and dont know if those are laughable values as you previously stated about the instructions. Im just a diyr trying to program something I know very little about so if I come across a little confusing its because I am
I see a lot of people here are passionate about thier profession and thats good for people like me. BTW thanks to all of you for your input..