(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Moen 94543 Diverter Removal

  1. #1
    DIY Junior Member clabber's Avatar
    Join Date
    May 2010
    Location
    Chico, TX
    Posts
    2

    Question Moen 94543 Diverter Removal

    I am trying to replace a stuck Moen 94543 diverter. From what I can tell, it does not have a retaining clip like other Moen cartridges, but I can't figure out how exactly it is being retained. I have removed the brass nut, but the diverter still won't budge. I've found some passing references to turning the diverter, but can't see exactly how to turn it.

    This is the diverter/faucet, the second drawing: http://www.moen.com/shared/pdf/2995pt.pdf

    And this is what I am looking at right now: http://i.imgur.com/frwMY.jpg



    The reason I'm trying to get it out is the valve is stuck. Don't want to turn too hard since the stem is plastic. I'm soaking it in CLR right now. Any ideas?
    Last edited by Terry; 05-23-2010 at 06:23 PM.

  2. #2
    DIY Junior Member clabber's Avatar
    Join Date
    May 2010
    Location
    Chico, TX
    Posts
    2

    Default

    Hate to reply to my own thread, but the CLR worked. Not two minutes after I posted this.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •