Tomboy
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I have a Delta Single Knob Shower set that was installed about 8 years ago (1300 Series, I think) that has begun to leak throuh the shower head when turned off. I don't have any paperwork with it to show how it is put together, but I have tanken off the knob, the escuthheon plate, and a sleeve that covers the valve. It has no cut off at the valve, so rather than running to the basement to shut down the house water, I thought I'd check to see if anyone out there was familiar with how to take it apart, before I try to and screw it up so I'd be afraid to turn the water back on.
The control valve mechanism is about 2 inches in diameter, and is held to gether (I think) by a collar that doesn't seem to move either clockwise or counter-clockwise to medium pressure. Didn't want to put the pipe wrench to it until I knew what I was doing.
Any suggestions?
The control valve mechanism is about 2 inches in diameter, and is held to gether (I think) by a collar that doesn't seem to move either clockwise or counter-clockwise to medium pressure. Didn't want to put the pipe wrench to it until I knew what I was doing.
Any suggestions?