(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Toto Eco Drake flush handle questions

Hybrid View

  1. #1
    DIY Junior Member mccun934's Avatar
    Join Date
    May 2010
    Location
    Beaverton, OR
    Posts
    1

    Default Toto Eco Drake flush handle questions

    Hey all,
    I recently installed an Eco Drake in our master bath and wanted to put a flush handle that matched the other trim items in the room. I bought Moen handle that matched our shower trim but upon installing it realized it doesn't fit in a standard way and requires to to pull up to flush vs. pushing down:



    anyone have any thoughts on how I could get around this? In another bathroom we have the Promenade which doesn't have a problem because the green valve tower sits low enough in the tank that you can orient the handle in the proper way.

    Has anyone been able to use non-Toto handles on the Drake?

  2. #2
    Questions from readers Guest's Avatar
    Join Date
    Nov 2005
    Location
    posts, emails and comments from readers reposted by Terry
    Posts
    187

    Default

    The Drake has an angled tank, sort of like the Kohler Wellworth tanks.
    The brass rod on the Drake tank lever has bends that fit around the fill valve.

    The trip lever pictured has a square pin and set screw, what happens if you rotate the lever 90 degrees?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •