Rough Plumbing-Bath to Shower Conversion HELP
- Thread starter Steveg91
- Start date
Users who are viewing this thread
Jadnashua
Retired Defense Industry Engineer xxx
WHere's the vent line for that tub connection? I think to answer your question, we'd need to see more of what's underneath the floor and back in the wall. Is the rest of the plumbing abs, cast iron, or continues in brass or copper?
Sponsor
Paid Advertisement
The tub waste and overflow gets thrown out, you will need to move the drain and p-trap.
It would be nice if you can go far enough back to upsize to 2"
Some banded shielded couplings can transition to new pipe.
It would be nice if you can go far enough back to upsize to 2"
Some banded shielded couplings can transition to new pipe.
hj
Master Plumber
- Messages
- 33,603
- Reaction score
- 1,042
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
Given the pictures you show there, you DON'T. You need to open up the floor until you locate a 2" drain line, then route it to the new shower's drain location.
Similar threads
