vinceliberto
New Member
In the process of installing a bathroom in my unfinished basement. I have an existing rough in and have found the tub drain under the concrete. I have opened up a whole the size recommended per the instructions for my tub. The problem I have is that with the angle and location of the 2" drain I can not get far enough back on the drain to cut it to install the P-trap. My question is can I install two 90's out of the tailpiece from the tub and then the P-trap to be able to connect it further forward on the drain? I've attached a picture of what I'm talking about. Obvisouly I understand that my pick has a combination of 1 1/2 and 2" fittings, I just grabbed what I had sitting around to explain what I meant.
Thanks for the help!
Thanks for the help!