The Aquia III needs 11.5"
The Drake needs 10-7/8"
I have a 11" rough-in and want to know if the 12" Toto Aquia III I ordered will work? I know, I should have measured first before ordering.
Any ideas or suggestions?
Last edited by joelprice; 05-07-2010 at 11:35 PM.
Thanks... Terry. If I was able to get a 10" Aquia would that work? Do you know of anyone in the San Diego area who has the 10" Aquia in stock?
So the Drake will work with a 11 3/8" rough-in? My remodeler is concerned about the fit. Do the CST743S and the CST744S both require the same amount of space?
Thanks Terry! Do you know if I can find a PDF somewhere that says that? It would help me to prove that it will fit.
We install them. Hundreds of them. I'm not going to bother making a pdf for you saying that.
If you don't believe someone that has installed hundreds, then you might as well pick up the 10" rough and have it set out 2" from the wall.
Free advice is given freely, but I'm pretty busy to be making diagrams of things I've been doing for years.
I know what works from experience, if your handyman needs documentation for something as simple as the installation of a toilet, perhaps he's in the wrong field.
Thanks Terry. I'm also considering the UltraMax. You had said elsewhere the UltraMax requires a 11 1/4" rough-in. Does that mean with a 11/4" rough-in, the tank would actually be touching the wall?
Can Drake II, CST454CEFG fix with 11" rough in?
I checked its specification
and there is 1-1/4" gap behind the tank.
So if anyone has a 11 3/8" rough-in and is concerned, here's a testimonial that it worked. Thanks again to Terry. Saved me from having a Wellworth installed. :-)