Terry Loves Bellevue & Kirkland
425-649-5683, Top Rated Plumber 1-877-808-5683
Results 1 to 6 of 6

Thread: toilet with exhaust built-in

  1. #1
    DIY Junior Member mtom01's Avatar
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    3

    Question toilet with exhaust built-in

    I am interested in the toilet with this exhaust built in, see link below. I could not find any reviews when i googled.

    Anyone tried this, I'm remodelling two bathroom, and would like to try this...


    http://www.betterlifestylesinc.com/tbeshowitworks.html

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    23,545

    Default

    It would not be the easiest thing to retrofit into a room unless you were doing an extensive remodel. From its looks, you would have to know the finished floor elevation almost exactly in order to get the wall opening in the correct location. IF the toilet is NOT a good flushing one, you do not have any other option other than to install a conventional one and abandon the vacuum system. IF any thing ever happens to the bowl, after about the first two years when the company goes out of business for lack of sales, you will have an expensive lawn ornament. Over the years many companies, i.e., American Standard, have produced "venting" toilets and NONE have ever lasted more than few years.

  3. #3
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    6,841

    Default

    Invest in a Toto and live happily ever after!

  4. #4
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    19,222

    Default

    Some of the Toto Neorest (sp?) have an activated charcoal filter to help remove odors. Not inexpensive, but probably supportable in the long term. Personally, a good exhaust fan generally works. Get an occupancy sensor that runs the thing when it detects someone in the room, and then runs for a (often settable) time after they leave.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer

  5. #5
    DIY Junior Member mtom01's Avatar
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    3

    Default

    Currently I have a Elger & americam standard; the Elger was a recommended model (consumer reports) when I changed it. Now iam planing to remodell both bathroom one at a time.

    HJ u r right, if the company goes belly up i be in square one again; I was impressed with the exhaust suction deal for the stinkiness without it spreading all over the bathroom.

  6. #6
    Homeowner geniescience's Avatar
    Join Date
    Nov 2005
    Location
    humid summers hot, humid winters cold
    Posts
    2,152

    Default

    A Splitter (Wye) installed in your bathroom vent can allow you to have one vent opening in the ceiling, and one more vent opening down low in a wall, next to the toilet seat. This will pull air away from the toilet seat instead of forcing it to rise up to the ceiling vent, where it wafts past your face and nostrils on its way up.

    NuTone - Broan has such splitters on their web site. I think the product is part of the ILFK series. Go search and let us know what you find.

    Obviously you do need to make room in the wall for the vent, so it is good when you are remodeling.

    hope this helps.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •