(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: PEX design question

Hybrid View

  1. #1
    DIY Junior Member JGLA's Avatar
    Join Date
    Mar 2010
    Location
    Studio City, CA
    Posts
    8

    Default PEX design question

    I'm trying to plan my runs for a repipe and I just want to make sure of something. Due to the way my house is laid out, my supply line will end up passing near most of the fixtures that need to be connected on its way to the water heater. Logically, it would make sense to connect flow-through tees to submanifolds at those places, but I've never seen any discussion or diagrams with that setup. Is one never supposed to divert off of the supply line before it connects to the heater?

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,632

    Default

    If that were the case, most houses would end up using a LOT more copper tubing than necessary. The water heater is just another fixture, so you connect to it when the pipe gets there, even if the entire rest of the house is connected before that.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •