(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: slow flush??

  1. #1

    Default slow flush??

    I put a toilet in a friend's house about 6 months ago. It was the first time a toilet had been installed in this particular area (laundry/utility area) in about 25 years. The toilet worked great...that is until about 1 month ago. The toilet starts to flush o.k., then it looses steam. It actually slows down and appears as if it just swirls around. Then after a few moments the water slowly evacuates from the bowl. Where should I start???

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,434

    Default

    Sounds like you have a clog in the drain line. You probably suspected that. Not sure of the best approach. A pro will pop up soon...doubt a plunger will help, but it might - wouldn't hurt to try.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Plumber, Contractor, Attorney LonnythePlumber's Avatar
    Join Date
    Sep 2004
    Location
    Wichita, Kansas
    Posts
    319

    Default Check tank

    While I agree with Jim that it is most likely a clog it can also be a tank adjustment. The water level may be too low, the flapper may have become worn and need replaced and others. This is also the first sign of the sewer main becoming clogged.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •