RustyPipes
In the Trades
Ever done "pipe Bursting"? Does it work on pipe that changes direction?
The pipe is horizontal out of the meter for 10 feet, turns up 60 degrees after passing under a sidewalk, after ten feet of hill it turns horizontal and runs 30 feet, turns 40 degrees right, then is horizontal for 30 feet. It is Polybutylene pipe, and the soil is very rocky clay.
Between the sidewalk, rocks and the hill, trenching is going to be a huge hassle. There is no access for a small excavator due to the hill. (unless it can pull itself up. But, not too many folks like sitting in a cab at a 60 degree angle.)
The pipe is horizontal out of the meter for 10 feet, turns up 60 degrees after passing under a sidewalk, after ten feet of hill it turns horizontal and runs 30 feet, turns 40 degrees right, then is horizontal for 30 feet. It is Polybutylene pipe, and the soil is very rocky clay.
Between the sidewalk, rocks and the hill, trenching is going to be a huge hassle. There is no access for a small excavator due to the hill. (unless it can pull itself up. But, not too many folks like sitting in a cab at a 60 degree angle.)