Concealed connections for a free standing tub

Users who are viewing this thread

Ichthys

New Member
Messages
4
Reaction score
0
Points
0
Location
Naples, FL
Plumbing Maestros,
I've purchased an "modern" acrylic free standing tub for my bath. It's quit lightweight (cheap) and has a nice spot for mounting my fixtures to. I would look really slick if I could completely hide the supply and drain connections under the tub. There's plenty of room under there. I was thinking that the connections could be braided ss lines for the supply and some sort of flexible hose for the drain. By tiliting the tub I would have access to wrench everything together. Does this sound feasible and code compliant?
TIA for your help. This forum is a wonderful resource.
Lars

bmdc_tub_a1.jpg



bmdc_tub_a2.jpg


Below is a Kohler valve rough.

free-standing-kohler-rough-1.jpg



rapidconnect-terrylove-1.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks