oldberkeley
Member
--------------------------------------------------------------------------------
I need to drill 6 holes, 3 in each side jamb, into new, very hard porcelain tile.
Diamond bits are expensive, just a DIY'er here!
Considering drilling 3 new holes in each jamb, to line up with the grout lines. Then fill the old holes with steel/zinc plated hole plugs (tried one of the plugs, looks fine, also not exactly in a noticeable place.)
Any thoughts on this? TIA
I need to drill 6 holes, 3 in each side jamb, into new, very hard porcelain tile.
Diamond bits are expensive, just a DIY'er here!
Considering drilling 3 new holes in each jamb, to line up with the grout lines. Then fill the old holes with steel/zinc plated hole plugs (tried one of the plugs, looks fine, also not exactly in a noticeable place.)
Any thoughts on this? TIA