HDClown
New Member
My 16+ year old tank finally started to leak last week. Had a Noritz NR98-OD installed Fri/Sat. So far everything is working great.
In reading through the manual, it indicates to "contact Noritz" to be able to allow the temp. set point to be set above 140F. I've also seen mention of other things teh controll can show you, like inlet temperature. I also came across a setting while I was adjusting the max set point (5 on or 5 off) but no idea what it does.
Could anyone provide me the "installers" usage guide for the remote, so I can access all of the features?
pic of the installation:
In reading through the manual, it indicates to "contact Noritz" to be able to allow the temp. set point to be set above 140F. I've also seen mention of other things teh controll can show you, like inlet temperature. I also came across a setting while I was adjusting the max set point (5 on or 5 off) but no idea what it does.
Could anyone provide me the "installers" usage guide for the remote, so I can access all of the features?
pic of the installation: