geny725
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
hello there
my 4 year old pressurized water tank has a cut in cut out rate of 40-70psi.
lately the water pressure in the house has been lower, or perhaps it could be the volume? or both? i cant tell the difference.
then i discovered that when someone uses the shower, the pressure gauge kicks in from 40psi to only 60psi and gets stuck there! it only goes back down to 40psi when the shower is turned off.
but if you use a sink, the pressure gauge runs regularly from 40 to 70, then goes back down slowly, then back again to 40-70
Please help. I asked a plumber and i was only told that the pipes are clogged!!
Thank you!!!!!
my 4 year old pressurized water tank has a cut in cut out rate of 40-70psi.
lately the water pressure in the house has been lower, or perhaps it could be the volume? or both? i cant tell the difference.
then i discovered that when someone uses the shower, the pressure gauge kicks in from 40psi to only 60psi and gets stuck there! it only goes back down to 40psi when the shower is turned off.
but if you use a sink, the pressure gauge runs regularly from 40 to 70, then goes back down slowly, then back again to 40-70
Please help. I asked a plumber and i was only told that the pipes are clogged!!
Thank you!!!!!