(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 11 of 11

Thread: 90 degree bend in sewer drain pipe?

Threaded View

  1. #1
    DIY Junior Member
    Join Date
    Sep 2005
    Location
    Minnesota
    Posts
    3

    Default 90 degree bend in sewer drain pipe?

    Hi,
    Hopefully someone can help me with this question. What I did was just move the drain pipe over 12" from the original layout and add a drain for the laundry room. The question is can I do this with a 90 degree bend in the corners? The back corner against the wall matches the original layout with a 90 degree corner. The front was at 45 degree, but with moving it over I put in a 90 degree corner. I read in the Minnesota plumbing codes that a change of direction has to be a 45 degree bend.
    Will this pass inspection at the 2 90 degree turns?

    Thanks in advance.

    Jim
    Attached Images Attached Images  

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •