spetrucco
DIY Junior Member
Hi,
Just want to get the forums optinion on 2 seperate layouts.
First Pic
Laundry room with sink,
right to left
santee with 1.5" sink stub with 2inch drain down and 1.5" reducer to vent up
2" long sweep 90
2" laundry pipe to trap to wye with 2" vent vertical.
2" wye for tie in to 2" sink line.
Far left 2 pipe will turn down and transition to a 3inch (per IPC in PA ) then drop straight down to basement where it ties in to main horizontal drain.
Second pic
Bathroom toilet and double sink vanity. (fyi tub runs sperately)
From right to left
3" 90degree street for toilet flange
(to the right of the flange is the sink (5ft) not in pic)
2" wye vertical for toilet vent.
2" wye horizontaL (SLIGHTLY ABOVE) for sink tie-in.(sink is individualy vented out of pic)
Far left pipe turns 90 and drops to basement where it ties in to main horizontal drain.
FYI ....all that double studding is not to accomodate the plumbing but to contain noise.
thank you in advance for any advice.
Shawn
PA
Just want to get the forums optinion on 2 seperate layouts.
First Pic
Laundry room with sink,
right to left
santee with 1.5" sink stub with 2inch drain down and 1.5" reducer to vent up
2" long sweep 90
2" laundry pipe to trap to wye with 2" vent vertical.
2" wye for tie in to 2" sink line.
Far left 2 pipe will turn down and transition to a 3inch (per IPC in PA ) then drop straight down to basement where it ties in to main horizontal drain.
Second pic
Bathroom toilet and double sink vanity. (fyi tub runs sperately)
From right to left
3" 90degree street for toilet flange
(to the right of the flange is the sink (5ft) not in pic)
2" wye vertical for toilet vent.
2" wye horizontaL (SLIGHTLY ABOVE) for sink tie-in.(sink is individualy vented out of pic)
Far left pipe turns 90 and drops to basement where it ties in to main horizontal drain.
FYI ....all that double studding is not to accomodate the plumbing but to contain noise.
thank you in advance for any advice.
Shawn
PA