(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Takagi tk3 flash igniter woes

  1. #1
    DIY Junior Member
    Join Date
    Mar 2010
    Location
    redding calif
    Posts
    1
    Blog Entries
    1

    Unhappy Takagi tk3 flash igniter woes

    HEY, GUYS:
    I bought a Takagi TK3 about 2 years ago and the igniter goes out. I'm a retired car mechanic/fabricator/machinist, etc.
    So, what is the programming in the processor for operating the igniter?
    What are the timer limits, and what keeps the fire lit?
    How does the flame rod and fuel mixture rod work?
    Where does the ignitor rod fire the spark to?
    My trouble codes are:
    111 no fire
    121 fire went out.
    My unit is outside mounted in the screen porch of my remodeled bungalow. Propane unit, city H2O
    Help me out guys, I need takagi parts and advice, I'm dying out here!
    HANK WHITE PH 530-357-3246

  2. #2
    In the trades Dana's Avatar
    Join Date
    Jan 2009
    Location
    01609
    Posts
    2,714

    Default

    Sounds like a flame detector problem. Look in the manual to figure out where the flame detector (item 106, page 35) is inside the unit. Turn off the power and gas before diving in. Take a ScotchBrite or similar soft plastic scouring pad and buff up the business side of the detector,see if that keeps it from recurring.

    Flame detectors are susceptible to chemical contaminants in the combustion air- if it's outside an open kitchen window pr range vent where you're putting a lot of suspended fry-o-latorgrease in the air or something you can bet on it having an issue sooner or later.

    Word is Takagi has a pretty good help line- they'll talk you through almost any diagnostic issue.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •