(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Leaky Diverter

  1. #1

    Default Unidentified Leak!

    I have a Symmons Temptrol Shower Single Handle Mixer that is leaking from the Diverter hole. I have already replaced the spindle, Cap and O-Ring but water continues to spurt out of the diverter (when fully assembled I can see it coming out of the bottom of the face place and without the plate as well) whenever it is turned on??



    Thanks for any advice!
    Last edited by jessily; 09-12-2005 at 05:12 PM.

  2. #2
    Master Plumber Dunbar Plumbing's Avatar
    Join Date
    Apr 2005
    Location
    Northern Kentucky/Greater Cincinnati Area
    Posts
    2,943

    Default

    Contact the mfg. of the product. If you used Danco replacement parts instead of Symmons.....that is where your problem is stemming from.
    Read what the end of this sentence means.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •