bmb2m9
New Member
Hey guys, I just dry fit my plumbing drains for our laundry room remodel. If you could check the attached picture of my work it would be greatly appreciated. The setup is going to be washer, dryer, sink, from left to right. The only snag (well not the only one..but) I ran into was having to shift the drain vent over to dodge the dryer vent (since it was already cut into the brick). Disregard the hot and cold supply lines, they are being moved.
It is just a dry fit so I know the pitch and plumb in the picture is not perfect. Thanks for any help and advice you can give, you all have always been helpful.
It is just a dry fit so I know the pitch and plumb in the picture is not perfect. Thanks for any help and advice you can give, you all have always been helpful.