(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: How to clean & maintain elec WH tank

  1. #1
    DIY Junior Member
    Join Date
    Feb 2010
    Location
    TN
    Posts
    5

    Default How to clean & maintain elec WH tank

    See adjacent post for title of elec 50 g HW that had hot flow reduced in 5-10 seconds. I should have titled it about how to clean tank but I could not get it changed in the list visible to viewers. Sorry for the inconvenience, I am new at typing these things.

    Local suppy house had alum, tin zinc alloy anodes and the factory offered aluminim only. Factory says the 3 metal alloy is for stinky water, probably sulfur which most people do not have.

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default

    Cleaning the tank is not the problem. Repairing the electrical component(s) is. The anode rod is also not the cause of lack of hot water. My procedure for all my tanks has been;
    1. Install the water heater.
    2. Turn on the water
    3. Turn on the electicity, or
    4. Turn on the gas, light the pilot, and then turn on the burner
    5. Use the hot water for many, many years
    6. Replace elements in an electric heater if they burn out.
    7. Replace the water heater when it eventually leaks.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •