(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: gravity feed spring

Threaded View

  1. #1
    DIY Junior Member Ridgeview Farm's Avatar
    Join Date
    Feb 2010
    Location
    kirby vermont
    Posts
    2

    Default gravity feed spring

    I think posted this once but cant find it. I have a tile spring that produces 5 gal/min and a psi at the house of 15-20. Storage capacity is about 260 gallons. Assuming water temp is above 40 F, I have to check on that, can I run a 5 ton heat pump? I know that the rule of thumb is 1.5 gal/min/ton, and between 7000 and 20000 gal per day. Theoretically that would require my entire spring. I have a discharge pond. I wonder if it might be practical to at least offset some of my heating cost. Any body ever use any system like this? I live in northern Vermont.


    Tom


    ps March 26...no replies...guess I'm the smart one...I'll figure this out on my own
    Last edited by Ridgeview Farm; 03-27-2010 at 07:45 AM. Reason: no replies

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •