P trap and tailpiece too close!

Jdbangels · Feb 9, 2010

I replaced a bathroom vanity sink. All went well until I tried to attach the p trap. The tailpiece for the new sink is about 1" too close. I have looked at the PVC flexible traps but that is still too close. Is there a way to do this without cutting anything?
Thank you for your help!

Gary Swart · Feb 9, 2010

Stay away from flexible traps, they clog. Tail pieces normally have to be trimmed to fit.

Sponsor · 2022-01-29T12:20:58-0800

Jdbangels · Feb 9, 2010

The height seems ok. It's that the tailpiece seems offcenter. It is about 1" closer to the wall than the old sink. Will shortening it make the p trap fit between it and the pipe coming out of the wall?

MACPLUMB · Feb 9, 2010

No it will not but if you have a tubular ext. P trap bring it out past the tail piece and connect it their

it doe's not have to always go straight back to the wall

Cacher_Chick · Feb 9, 2010

You could move the vanity a little to the right or left to allow the trap to line up.

P trap and tailpiece too close!

Users who are viewing this thread

Jdbangels

New Member

Gary Swart

In the Trades

Sponsor

Paid Advertisement

Jdbangels

New Member

MACPLUMB

In the Trades

Cacher_Chick

Test, Don't Guess!

Similar threads