(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: High Water Pressure Spikes on Well with Pressure Tanks

  1. #1
    Shared Well Services RayMan's Avatar
    Join Date
    Jan 2010
    Location
    Arizona
    Posts
    30

    Question High Water Pressure Spikes on Well with Pressure Tanks

    What would cause High Water Pressure Spiking at the house. I put a pressure gauge on the hose bib and its been on for three days now. The gauge has a needle that shows the highest water pressure reached, the first day the highest pressure was 65 psi the next day was 80 psi and today it reads 116 psi. as the highest pressure. The static pressure has remained at about 45 psi and the water pressure recovers to 42 psi with an open line in the house. There is no air in the lines.

    The pressure control switch is a 30/50 psi for 5 pressure tanks and the static pressure reading on the gauge in the well house has varied, it was 48 psi then 53 psi and the highest I read was 57 psi. There is a 5HP Submersible Jacuzzi Pump in the ground. The last time the pressure tanks were inspected they wrote the psi on each tank 30, 25, 25,25,30. They are 86 gallon Proline bladder tanks.

    Thank You For Any Explanation!!

  2. #2
    Previous member
    Join Date
    Jul 2009
    Location
    North of the Mason dixon Line
    Posts
    1,150

    Default

    Clean out the line running to the pressure switch or the pressure switch is bad.

  3. #3
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    It may be more likely that there are check valves and water heaters are building excessive pressure overnight. Or there is some filter etc. reducing flow through them.
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

  4. #4
    General Engineering Contractor ballvalve's Avatar
    Join Date
    Dec 2009
    Location
    northfork, california
    Posts
    3,258

    Default

    Water hammer would cause short spikes. If the house pressure was at 116 for more than a moment or two, You would start finding leaks at supplies, and the shower would drill holes in your head.
    Nix the recording gauge and just have the homeowner check a normal gauge installed inside the house somewhere. Move the "recording" gauge to the pumphouse to rule out switch issues.

    Water heaters in my houses with pressure regulaters and incorporated check valves have never caused any pressure rise over2 or 3 psi.
    Last edited by ballvalve; 02-01-2010 at 01:08 AM. Reason: spelling

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •