Hi all- new to the forum! Help- Pretty please!? Toilet is leaking down waste stack into basement. I pulled the toilet and there is no flange, just the lead "lipped" over the floor. Someone has cut a groove in each side to slip in the closet bolts but the lead just bends up under pressure. Sooooo my question is- should I just replace wax ring and screw toilet directly to floor(old school) or can I bend the lead up and screw down those half moon shaped thingies to hold closet bolts and bend lead back over? I guess years ago there were no flanges? Any input will be GREATLY appreciated. Thanks a bunch!