Frank G
New Member
Ill try to minimize this but I am trully confused at this point. Im looking for a tub surround. The problem is the tub (20 years old) must have been a reject. The two opposite corners are 3/4 higher then the others. That exsplains why the tile was cut in slivers to fit. The tile is gone and blue board cut and installed to fit the crooked tub. Now I am looking for a surround to put up. I realise I will have to cut the surround to fit the crooked tub and that is where my problen is. In a town of 250 K I can only find two surrounds that have no desighn that will not show the cut. Unfortunately they are about 1/8 inch thick. Internet searches may have shown what I need but e-mails have not been responsive and phone calls seem to be to sales people with no knoledge of what I am talking about. I just need a surround with no desighn that has some thickness to it so it does not look to cheap. My opologies for babaling but I'm just worn out on this one.
Any help or ideas would be greatly appreciated.
Any help or ideas would be greatly appreciated.