CJ-8_Jim
New Member
I’m splicing in another water filter in parallel to existing filter (to double velocity).
Does anyone foresee any problems (performance or otherwise) with merging two ¾†copper water supplies into one using a “T†fitting?
That is, one supply will come into the “T†from the left and the other supply will come in from the bottom.
Thanks for your input.
Jim
It will roughly look like this when done:
Does anyone foresee any problems (performance or otherwise) with merging two ¾†copper water supplies into one using a “T†fitting?
That is, one supply will come into the “T†from the left and the other supply will come in from the bottom.
Thanks for your input.
Jim
It will roughly look like this when done: