(206) 949-5683, Top Rated Plumber, Seattle
Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Schlage deadbolt-flush screws

  1. #1

    Default Schlage deadbolt-flush screws

    Hi - I am trying to remove a what I think is a Schlage deadbolt. From the inside of the lock, instead of phillps screws or flat screws, the "screws" are entirely flush to the lock. The face of the deadbolt as I look at it from the inside has two flush screws, not phillps or flat. I know it should be simple, but I am totally stuck....

    Thank you for any help!

    Paul

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,401

    Default

    Some locks come with plugs that are hammered in after the screws are installed for additional security...you might be looking at those. It prevents someone from easily removing the whole lock, defeating its purpose. It can be a real bear to remove them, if installed like this. Sometimes, they are hardened steel as well to thwart drilling them out. You may destroy the lock removing it. Time to maybe talk to a locksmith. Maybe someone will have some direct experience.

    You might check a store where they sell that type...you might be able to look at a new one and see what is going on. Same thing is true if you search the Schlage website...maybe they will have some insight and suggestions. Let us know what you find out...
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    I think I remember seeing drive plugs on some Schlage locks. They might pop out with an icepick.

    This could also be a Medeco lock, and they are not easily worked on . Locksmith call is in your future!

  4. #4
    General Contractor Carpenter toolaholic's Avatar
    Join Date
    Jul 2005
    Location
    Marin Co. Ca.
    Posts
    829

    Default I'M a carpenter ,both answers are right

    I take my grinder to the plugs destroying the lock. screws are inside plugs

    locksmiths have a hard time removing them. what's your time worth?

  5. #5

    Default

    Quote Originally Posted by bbbluueyes
    Hi - I am trying to remove a what I think is a Schlage deadbolt. From the inside of the lock, instead of phillps screws or flat screws, the "screws" are entirely flush to the lock. The face of the deadbolt as I look at it from the inside has two flush screws, not phillps or flat. I know it should be simple, but I am totally stuck....

    Thank you for any help!

    Paul
    just put the key in the deadbolt and turn the key a quater turn.
    there is a window that opens up so you can see the phillips screws.

  6. #6
    General Contractor Carpenter toolaholic's Avatar
    Join Date
    Jul 2005
    Location
    Marin Co. Ca.
    Posts
    829

    Default Rjmc , Not So

    the key needs to be reinserted 3 times in 3 seconds, then 1/4 turn to see the window Tool

  7. #7
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,633

    Default lock

    Quote Originally Posted by toolaholic
    the key needs to be reinserted 3 times in 3 seconds, then 1/4 turn to see the window Tool
    The only way it could keep track of how fast you insert the key was if it were electronic. I doubt that this deadbold is electronic. An normally the only ones that need to have the key inserted and rotated are double cylinder ones, which are illegal for most applications.

  8. #8
    General Contractor Carpenter toolaholic's Avatar
    Join Date
    Jul 2005
    Location
    Marin Co. Ca.
    Posts
    829

    Talking H J' We're Bad Lads Having A Little Fun

    BOYS WILL BE BOYS

  9. #9
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,633

    Default fun

    In that case you forgot to mention that you have to jump up into the air and click the heels of your red shoes together each time you insert the key.

  10. #10
    General Contractor Carpenter toolaholic's Avatar
    Join Date
    Jul 2005
    Location
    Marin Co. Ca.
    Posts
    829

    Angry That's Not Funny H J

    Who told you about my red pumps? S F ,an interisting city

  11. #11

    Default toolaholic

    You are what we called in the Seabees an a hole.

  12. #12
    General Contractor Carpenter toolaholic's Avatar
    Join Date
    Jul 2005
    Location
    Marin Co. Ca.
    Posts
    829

    Default 5 months later you make this inappropiate, crass reply?

    have you just been released from a mental hosp. or jail?

    I was a sgt. in the Marine corps, Am i in awe of a little wacked out see bee?

    I 'm afraid not take your meds and reply in Feb 2007.

    Terry ,please dump this low life, thank's Tool

  13. #13

    Default

    I think "wise-ass" would be a better description. At least that's what we civilians would call you.

  14. #14
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default Enough already!

    This thread has degraded to name calling, which we really would rather not have on this forum. Enough!

  15. #15

    Default Go NAVY

    Thanks for the reply for the Moen posi-temp.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •