Like a lot of folks, I NEVER thought I would spend so much time researching a toilet. However, your site has some of the best information I could find anywhere! NICE WORK!
I've done a lot of research and like a lot of folks transitioning from what I know to what is better is a bit of an adjustment. The feedback from all the users has been an immense help. So...
My limitation is that my home has 2 bathrooms with 10" rough-in. I have found that it seems to have reduced my options quite a bit, especially in dual flush. I've read enough to rule out the Caroma. So, I think after all my research that the Aquia CST412MF.10 is my best choice.
The installation instructions are made for a couple model variations and think I understand the difference but just to make sure...Does the model that I am planning on buying still mount conventionally straight down onto the socket? With the exception of adding the mounting blocks, it seems rather straight forward.
Also, my water outlet is about 5" above floor (6" recommended) and 6 3/4 to the side of the center of the outlet (7 3/4" recommended). Do you see that as being a major issue?
Hey, I work for the government...measure it with a micrometer, mark it with a grease pencil, cut it with a chain saw.
Is there another model you think I should look closer at?