(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Toilet Pipe Issue

  1. #1
    DIY Junior Member krs8808's Avatar
    Join Date
    Dec 2009

    Default Toilet Pipe Issue

    When i removed the bolts and pulled the bowl, that's all i saw. I was looking for a flange or something that the bolts were screwed to but no luck .

    My first hope was to use that push in flage and screw down to the new plywood subfloor (to be tiled) but after doing some research here, i'm kinda feeling that that isnt the best solution.

    The pipe is soft and bends easily so i think its lead? (from a 1938 house) on the second floor. Any advice would be appreciated. Thanks in advance

  2. #2
    Master Plumber Dunbar Plumbing's Avatar
    Join Date
    Apr 2005
    Northern Kentucky/Greater Cincinnati Area


    You'll have to bust up that concrete and get to that metallic piping under the floor, reconnect solid and come back up with plastic piping.
    Read what the end of this sentence means.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts