Bradford White FVIR question

Users who are viewing this thread

VTXdude

New Member
Messages
127
Reaction score
0
Points
0
Location
New Hampshire
Instead of having just the small screen on the underside of the tank for air intake like the Smith/State/Whirpool etc have, does the Bradford White have the entire bottom open to accept air intake (I know it gets air from grates on side of heater but was wondering if when it actually goes in the burn chamber is it the same small opening as the others mentioned or is the whole bottom open?


The BW picture is a little confusing as it shows air coming up in one section. I thought I read somewhere that the BW is superior because it allows air to come up into the chamber from the whole bottom (which to me would be a benefit for proper combustion and drafting, venting)


Thanks
 

Master Plumber Mark

Sensitivity trainer and plumber of mens souls
Messages
5,533
Reaction score
354
Points
83
Location
indianapolis indiana - land of the free, home of
Website
www.weilhammerplumbing.com
yes

you are really beating this to death....

look at this page on my site and you will see the difference...

http://weilhammerplumbing.com/products/

WaterHeater_BW_Burner.jpg
 
Last edited by a moderator:

VTXdude

New Member
Messages
127
Reaction score
0
Points
0
Location
New Hampshire
I suppose I am but I want to be 100% sure that I won't make the same mistake on a water heater.

Just to clarify...you answered yes in your title response...were you meaning yes to my question if the whole bottom of the BW combustion chamber was open to accept incoming air? I have been on your site a LOT as there is a lot of good information. That picture gives me a good idea on how a BW accepts incoming air but only shows it coming up into the chamber in that one spot. I'm just wondering if that is an example or if it actually takes in air from whole bottom of the chamber


Maybe I'm not asking it right...does it makes sense what I'm asking? I guess the majority of people here who have installed BW's may know? I've never seen one before so hard for me to see...I DO know how awful and small the Kenmore air intake is though...the mesh screen around base of the water heater may stop some dust and lint but I bet it doesnt do any favors for the airflow


Thanks for your help :)
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
I don't see how much clearer it can be explained. Mark's pictures tell the story pretty well. Bradford White or Rheem are the only choices that make sense. How many more trips around the barn do you need?:)
 

VTXdude

New Member
Messages
127
Reaction score
0
Points
0
Location
New Hampshire
Ok maybe I'm misunderstanding...I see how the air comes in the side...I see how the air goes down into the holes...I see how air comes up into the chamber...

What I am unclear is on where the air comes into the chamber...is it only the one spot that shows in the illustration or does it come in all over the bottom of the chamber? Is there more than one opening on bottom of chamber? Mark has had some great shots of the bottoms of the other tanks..wonder if this is the same or more wide open?


I guess a better way to ask this...is ther only one slot on the bottom of the BW to accept air similar to the AO Smith? The difference being that with the side mount air inatke it will stay cleaner?


I am asking a particular specific question...i'm sorry if I'm ticking so people off...this stuff is 2nd nature to you guys...all new to me, hence all the questions
 

VTXdude

New Member
Messages
127
Reaction score
0
Points
0
Location
New Hampshire
Found this on You Tube explaining just about all my questions...thanks guys for the info and you were pretty much dead on....seeing the video really helped a lot especially in regards to my question on how big the flame arrestor is on the BW



I gotta say this water heater looks pretty impressive....makes me think the Kenmore is a ticking time bomb :eek: Why others didn't follow BW's lead is beyond me


Peace of mind I think will be switching to a BW
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks