(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Toto Drake height issue

  1. #1
    DIY Junior Member
    Join Date
    Dec 2009
    Location
    California
    Posts
    2

    Default Toto Drake height issue

    I have a 29" high space(there is a narrow shelf extending from the vanity top over to the top of the toilet)and wanted to install a 28 1/2" Toto Drake. Will that be a problem as far as installing a 1 piece or a 2 piece toilet? In other words how much space do I need to lift the top off the tank? woudl a 1 piece be easier than a 2 piece?
    Thank you--trying to get this project done this week.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,201
    Blog Entries
    1

    Default

    You may be better off with the one-piece Ultramax if you only have 29"

    The Drake is a little taller then 29"

    The top of the Ultramax is 27.5" and with the lid off, it is 26" from the floor.

  3. #3
    DIY Junior Member
    Join Date
    Dec 2009
    Location
    California
    Posts
    2

    Default pcayanni

    Thanks for the tip on the slightly lower height of the Ultramax--just bought 2 of them to be installed on Thursday.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •