(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 1 of 1

Thread: Please critique my indirect layout/design

  1. #1
    DIY Junior Member
    Join Date
    Feb 2010

    Default Please critique my indirect layout/design

    Hi. The tankless coil in my 23 year old Trianco boiler is having a hard time keeping up with even a single 2.5gpm shower head so I am planning to install an indirect water heater setup.

    I took a shot at a layout on paper as a way of trying to understand what was needed. Below are two drawings. The first is my current tankless coil setup. The second is my best shot at what I'd need to do to convert to an indirect setup. I am hoping someone with expeience installing indirects might be willing to critique my design. In particular the components I am proposing and their location in the design.

    Thanks in advance for any insights/edits/recommendations you can provide.

    Last edited by mattk22359; 02-28-2010 at 06:44 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts