steveinct
New Member
I have a Toto with a G-Max flushing system. When I do a regular flush (press and release), the toilet flushes, but the water in the bowl barely fills. You can see the 'ridge' in the bowl where the water line should be, and it does not acheive this. If you press and hold the handle during a flush, the bowl fills to the proper level upon completion of the flush. I understand from a previous post that a press and release flush will relase 1.6 gallons and holding will release more. Ok, that is fine for a more powerful flush, but why would the toilet bowl water not resume to the proper fill level inside of the toilet if you do a 'standard' flush? Is there something funky going on with my Toto or is this normal?
Thanks
-Steve
Thanks
-Steve