(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Drain pipe size

  1. #1
    DIY Junior Member DMP's Avatar
    Join Date
    Nov 2009
    Location
    Phoenix
    Posts
    1

    Default Drain pipe size

    I am redoing my Master Bath. I removed the tub and shower and going to replace it with a two head shower, I was going to use the tub drain but it is only uses 1 “. If I use the shower drain that is 2” I need to move it 8’. (See Attachment)
    My question is having a vent that is 10’ from the drain will it cause problems with the p trap?
    Should I add the second 1 ” pipe (See Red dotted Line) just to make sure I do not have any problems?
    Thank you for your help
    DMP
    Attached Images Attached Images  
    Last edited by DMP; 11-16-2009 at 09:37 PM.

  2. #2
    Homeowner geniescience's Avatar
    Join Date
    Nov 2005
    Location
    humid summers hot, humid winters cold
    Posts
    2,152

    Default

    re-draw with lav drains, toilet drains and all venting. You will need a lot of help.

    in your next drawing, use one color to show pipes -- or two : existing, and projected. Don't use three different colors to show pipes.

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,374

    Default

    You cannot reduce the pipe size as you go down a drain, so the shower drain piping needs to be replaced to be 2" or more all the way to where it can drain into at least a 2" pipe. On a 2" pipe, the vent takeoff needs to be within (I think) 60", or 5' of the trap.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,602

    Default drain

    What is a "safety pipe"? If you run the drain that far, regardless of 1 1/2" or 2", you need an intermediate vent. You are making the typical DIY mistake of assuming anyone can be a plumber as long as he can put some pipes together.

  5. #5
    ACO Shower Drain Sales johnfrwhipple's Avatar
    Join Date
    Jul 2009
    Location
    North Vancouver, BC
    Posts
    2,957
    Blog Entries
    5

    Default 1 1/2" vs 2" Pipe

    For a double headed shower system a 2" pipe is ideal.

    Your thoughts for the new vent line I agree with but at the same time that whole line should be changed to 2" not restricted to 1 1/2".

    You just can't snake out a shower drain line that is 1 1/2" very easily. A snake running down a 2" line goes like a hot knife through butter.

    You need to bust concrete anyway i'm guessing so bring the drain line up to 2" and the 10' distance is 2 far to wet vent it so the second vent line will be required by code.

    I'm not a plumber and every home has it's own chemistry. Re draw your sketch and there are solid guys here that can help you with the science side. My gut says this plan will work but I always bring my plumber in to give the final say. It never surprises me when I learn about a new code that I never heard of before - this is why it takes plumbers so long to get their ticket - there is so much to learn.

    Good Luck.


    jfrwhipple@gmail.com - www-no-curb.com - 604 506 6792

    Always get construction advice double checked by your local city hall. Flood Test Every Shower - Every Time.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •