Runs with Bison
Member
I can always lower the pressure at the regulator in the meter pit.
I thought you said the tee for the toilet was before the regulator? Are you saying there is a second regulator?
I can always lower the pressure at the regulator in the meter pit.
The fluidmaster has two adjustments for height...the fine one you adjusted on the float, and a second one to adjust the total height of the tower...if I remember correctly, you twist the whole thing like a screw, and the thing expands. You may need to remove it from the tank to have enough clearance to do it. It is described in the instructions, which you probably didn't read...
I thought you said the tee for the toilet was before the regulator? Are you saying there is a second regulator?
I would pick up an assembly cap at Lowes Hardware and replace it.
$2.47 near the Korky parts in the plumbing section.
No tools, and less then a minute to replace.
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.