(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Mastercool

  1. #1
    DIY Junior Member
    Join Date
    Nov 2009
    Location
    Albuquerque
    Posts
    1

    Question Mastercool

    Buttoning up my Mastercool evaporative cooler for the season and I have encountered a problem with the 12" thick pads. Now that I've taken it all apart and cleaned it up I can not get the top of the unit back on. It's like the pads are 1/2" too tall now that they've dried out. Pad notches align with the pad support tray and I can find no obstructions anywhere. What stupid thing am I overlooking?

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,671

    Default Mastercool

    Probably do not have them setting into the notches on the bottom. The pads do not "grow" when they dry out. If they did anything it would be to shrink.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •