danaelk
DIY Junior Member
I'm roughing in for some hw baseboard. I have been using pex (w/O2 barrier) and it's been working great as this is a remodel. When roughing in stud spaces, can I install a copper stub out elbow that is made for a pex conn on one end and a sweat conn on the other. After i've crimped on my pex, and the wall is rocked, I am concerned that my sweating on the fin tube will heat up and damage the pex.
In other words, what are the best fittings to use for this application.
Thanks in advance for your input.
In other words, what are the best fittings to use for this application.
Thanks in advance for your input.